S&T Kar98K Replica - £150

All I’ve done internally to this is fill the horrible hollow plastic stock with expanding foam and silicone to get rid of the noise. I’ve also added some pieces of dowel in the butt to give the whole rifle a bit more realistic weight. To cover the front I’ve put some splinter pattern material and there is a bit spare if you want to do this to the butt. Comes with 2 mags – 1 original and one 3D printed by Chaz that needs a bit of fettling to fit. Never been to site for Chrono (says 480 out the box but I don’t reckon its doing that)



CYMA CM700 M40a3 Replica £200-£250

Has had a JJ Airsoft 90 degree trigger to give better adjustment of the trigger pull and new piston to fit. Hop rubber changed to Maple Leaf so able to lift .40’s. Comes with 4 x magazines, a Swiss Arms over Barrel silencer and a Harris Tilt-Lock bipod
Scope choice – I have a quality Hawke Varmint SF 2.5-10 x 50 the scope was £140 fantastic clear mildot reticule. If you want the system as shown it’s £250 but I used to have a Strike Systems 3-9 x 50 with standard Duplex crosshair – this can take the set-up to £200. At last Chrono recorded 483fps




CM 078 AK – DMR - £200
Been mechanically locked to Semi-auto and doing 410ps at last chrono. Taiwan Gun states “reinforced ver.3 gearbox, steel gears are mounted on reinforced 7mm bearings. The spring guide is reinforced (metal) together with the bearing, which makes the spring work easier - 120m / s spring. Polymer piston has metal teeth. I’ve added a custom hand rail and an adjustable Crane stock. I was going to try and build an RPK16 (hence the drum mag) and put back to full auto but the fact that it ranges spring sniper rifles with .30 saw me add an Elcan 6x scope and gave it a Russian eye cup look. Comes with 2 x 1600ma batteries and 6 x magazines 1 x drum mag

Is the kar98 still for sale? Steve